General
- The inside is 7' high and 80" wide. There are no
inside fender wells.
- extruded aluminum tongue and groove floor
with I-beams on 5" centers.
- There is a window on each side of the neck with
kick-out window on the curb-side for safety.
- Escape door with window at first stall on street side
- Removable center post from rear doors..
- RV camper door w/ screen on street side.
-The roof is one continous piece of metal!
- Electric brakes on all wheels.
- Spare tire and wheel with mounting bracket.
- Full width bumper below rear doors.
- Single speed drop leg jack and break away kit.
- DOT approved lighting, including high/low rear
stop, turn and tail lights, marker, tag, clearance
and required conspicuity tape. |
Horse Compartment
- Stalls are 40" wide with rubber-lining.
- Spring loaded stall dividers with solid alum head shield, pads both sides and slam latch.
- Head wall, rump wall, slant wall and rear doors lined and insulated up 48" high.
- 5/8" thick rubber floor mat.
- Drop down feed doors and face bars on each stall.
- A two way pop-up vent per stall.
- A dome light in each stall.
|
